ENERGY DETECTOR, 3-GANG

rail mounting device, 4 rail units
ETS product family: Physical sensors
Product type: Energy detector

2103 REG ES

Product characteristics
The energy detector has three channels for connecting loads to up to three separate phases with a common neutral conductor. Each channel can measure:

  • Voltage (eff.)
  • Current (eff.)
  • Active power
  • Reactive power

Additionally, the active power and reactive power of all channels will be summed up and displayed as three-phase power values along with the mains frequency.
According to the parameterisation the measured values will be transmitted on the KNX bus, either cyclically and / or when the value changes. An additional telegram will be transmitted if certain values exceed or fall below a specified limit.

The following meters exist for each channel and for the three-phase values:

  • 1 x energy meter total
  • 1 x energy meter ¬ľ h value
  • 3 x energy meter n
  • 3 x energy intermediate meter n

New in version 01

  • Direct measurement (without transformer)
  • Transformer measurement (with external 75¬†A¬†transformer, ratio 75:5, e.g. Phoenix Contact order key 2277611)

Technical data

Power supply via E1/N
¬†¬†¬†¬†Rated voltage: AC 110 … 240 V ~
    Mains frequency: 50/60 Hz
    Power consumption: max. 2 W
Inputs E1 … E3
¬†¬†¬†¬†Rated voltage range: AC 110 … 240 V ~
¬†¬†¬†¬†Rated current range: 4 mA … 16 A
    Rated frequency: 50/60 Hz
    Measurands: voltage (rms value)
current (rms value)
frequency
active power (signed +/-)
reactive power (signed +/-)
active energy (signed +/-)
External transformer
    Transformation ratio: 75:5
¬†¬†¬†¬†Secondary current: 0 … 5 A
Accuracy
¬†¬†¬†¬†Direct measurement (without transformer): 1 % of 200 mA … 16 A
¬†¬†¬†¬†Transformer measurement (75 A transformer, class 1): 2 % of 7.5 A … 75 A
Pulses LED
    Direct measurement (without transformer): 6400 / kWh
    Transformer measurement (75 A transformer): 427 / kWh
    Pulse duration: 4.9 ms
Power loss
¬†¬†¬†¬†Voltage measurement: ‚ȧ 0.03 W / phase
¬†¬†¬†¬†Current measurement: ‚ȧ 0.8 W / phase
    Power consumption from mains: < 1 W
Connection
    Connection mode: screw terminals
¬†¬†¬†¬†single wire: 1 x 0.5 … 2.5 mm¬≤
¬†¬†¬†¬†stranded without ferrule: 1 x 0.5 … 2.5 mm¬≤
¬†¬†¬†¬†stranded with ferrule: 1 x 0.5 … 2.5 mm¬≤
Ambient temperature: ‚ąí5 … +45 ¬įC
Storage/transport temperature: ‚ąí25 … +70 ¬įC
Mounting width: 72 mm (4 rail units)
KNX medium: TP 256
Rated voltage KNX: DC 21 … 32 V SELV
Current consumption KNX: typical 10 mA
Connection, KNX: terminal

Product documentation

Download

Product data sheet

Download

Database ETS3 + ETS4 + ETS5

Download

EC Declaration of Conformity

Download

Operating instructions

Download

SKU: 2103 REG ES Categories: , ,