3904 REG LED
Product characteristics
- 4 individually configurable LED dimming channels
- Maximum output current of 5 A per channel
- At 24 V DC up to 480 W LED output
- Possible channel combinations:
– 4 x independent channels
– 2 x Tunable White channels
– 2 x independent channels, 1 x Tunable White channel
– 1 x RGB channel, 1 x independent channel
– 1 x RGBW channel - Activation of the colour channels via “HSV” or “RGB”
- Integrated 230 V C-load relay to switch the LED power supply
- Integrated protection with on-site display against:
– Overcurrent
– Overvoltage
– Overtemperature
– Reverse polarity
Technical data
| Rated voltage: | AC 230 V ~ |
| Mains frequency: | 50 Hz |
| Rated current: | 16 A (C load) |
| Power loss: | max. 6 W |
| Connection | |
| Connection mode: | screw terminals |
| single wire: | 1 x 2.5 … 4 mm² |
| stranded without ferrule: | 4 mm² |
| stranded with ferrule: | 2.5 mm² |
| KNX medium: | TP 256 |
| Rated voltage KNX: | DC 21 … 32 V SELV |
| Current consumption KNX: | max. 18.9 mA |
| Connection, KNX: | terminal |
| LED | |
| Connection: | DC 12 … 24 V SELV < 20 A from device acc. to EN 61347-2-13 for LED modules with constant output voltage |
| Current consumption: | 20 mA |
| Outputs | |
| Number: | 4 |
| Max. current per output: | 5 A |
| For LED modules with constant input voltage to EN 62031.
LED modules with shared anode. |
|
| PWM frequency: | 488 … 600 Hz |
| Cable length: | depending on the cable resistance (voltage drop) |
| Connection | |
| Connection mode: | screw terminals |
| single wire: | 4 mm² |
| stranded without ferrule: | 4 mm² |
| Mounting width: | 72 mm (4 rail units) |
| Ambient temperature: | −5 … +45 °C |
| Storage/transport temperature: | −25 … +70 °C |
