LED UNIVERSAL DIMMING ACTUATOR / SPEED REGULATOR, 1-GANG

1¬†x¬†500¬†W, HV LED lamps typ.¬†3¬†…¬†100¬†W
rail mounting device, 4 rail units
ETS product family: Illumination
Product type: Dimmer

3901 REGHE

Intended use

  • Switching and dimming of incandescent lamps, HV¬†halogen lamps, dimmable HV¬†LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with LV¬†halogen or LV¬†LED lamps, dimmable electronic transformers with LV¬†halogen or LV¬†LED lamps
  • Speed controller for regulating the speed of single-phase motors e.g. induction motors or shaded pole motors
  • Mounting on DIN rail according to EN¬†60715 in distribution boxes

 

Product characteristics

  • Automatic or manual setting of the dimming principle suitable for the load
  • Protected against no-load, short-circuit and overheating
  • Signal in the event of a short-circuit
  • Outputs can be operated manually
  • Feedback of the switching position and the dimming value
  • Parameterisable switch-on and dimming behaviour
  • Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function
  • Light scene operation
  • Disabling of individual outputs manually or via bus
  • Status indication of the outputs via LED
  • Operating hours counter
  • Power failure longer than approx. 5 seconds leads to switch-off of the dimmer actuator. Depending on the parameter setting, the connected load is calibrated after voltage return.
  • Power extension possible by means of power boosters (ref.-no.¬†ULZ¬†1755¬†REG)
  • Optional accessory: compensation module LED, ref.-no.:¬†KM¬†LED¬†230¬†U

Technical data

KNX medium: TP 256
Rated voltage: AC 110 … 230 V ~, 50/60 Hz
Power loss: max. 4 W
Stand-by power: max. 0.5 W
Ambient temperature: ‚ąí5 … +45 ¬įC
Storage/transport temperature: ‚ąí25 … +70 ¬įC
Contact type: őĶ, MOSFET
Motor loads
    Motor switching current: 2.3 A
Lamp loads
Connected load, 230 V per output
¬†¬†¬†¬†Incandescent lamps: 20 … 500 W
¬†¬†¬†¬†HV halogen lamps: 20 … 500 W
¬†¬†¬†¬†Inductive transformers: 20 … 500 VA
¬†¬†¬†¬†Inductive transformers with LV LED: 20 … 100 VA
¬†¬†¬†¬†Electronic transformers: 20 … 500 W
¬†¬†¬†¬†Electronic transformers with LV LED: 20 … 100 W
¬†¬†¬†¬†Dimmable HV LED lamps: typical 3 … 100 W
¬†¬†¬†¬†Dimmable compact fluorescent lamps: typical 3 … 100 W
With setting “LED trailing edge phase control” the max. connection power for HV LED lamps and electronic transformers with LV LED doubles.
¬†¬†¬†¬†Ohmic-inductive: 20 … 500 VA
¬†¬†¬†¬†Ohmic-capacitive: 20 … 500 W
    Capacitive-inductive: not permitted
Connected load, 110 V per output
¬†¬†¬†¬†Incandescent lamps: 20 … 250 W
¬†¬†¬†¬†HV halogen lamps: 20 … 250 W
¬†¬†¬†¬†Inductive transformers: 20 … 250 VA
¬†¬†¬†¬†Inductive transformers with LV LED: 20 … 50 VA
¬†¬†¬†¬†Electronic transformers: 20 … 250 W
¬†¬†¬†¬†Electronic transformers with LV LED: 20 … 50 VA
¬†¬†¬†¬†Dimmable HV LED lamps: typical 3 … 50 W
¬†¬†¬†¬†Dimmable compact fluorescent lamps: typical 3 … 50 W
With setting “LED trailing edge phase control” the max. connection power for HV LED lamps and electronic transformers with LV LED doubles.
¬†¬†¬†¬†Ohmic-inductive: 20 … 250 VA
¬†¬†¬†¬†Ohmic-capacitive: 20 … 250 W
    Capacitive-inductive: not permitted
Connection
    Connection mode: screw terminals
¬†¬†¬†¬†single wire: 1 x 0.5 … 4 mm¬≤
¬†¬†¬†¬†stranded without ferrule: 1 x 0.5 … 4 mm¬≤
¬†¬†¬†¬†stranded with ferrule: 1 x 0.5 … 2.5 mm¬≤
Mounting width: 72 mm (4 rail units)
Approvals: VDE

Product documentation

Download

Product data sheet

Download

Database ETS3 + ETS4 + ETS5

Download

EC Declaration of Conformity

Download

Operating instructions

Download

SKU: 3901 REGHE Categories: ,