CONTROL UNIT 1 – 10 V, 4-GANG

rail mounting device, 4 rail units
ETS product family: Illumination
Product type: Dimmer

Intended use

  • Switching and brightness setting for lamps with operating devices with 1-10 V interface
  • Switching of electrical loads
  • Mounting on DIN rail according to EN 60715 in distribution boxes

2194 REGHM

Product characteristics

  • Manual switching of the relays is independent of the bus
  • Switching of capacitive loads and the resulting high switch-on currents
  • Flexible assignment of control inputs to switching outputs, e.g. to control RGBW lamps
  • Operation of the switching outputs as a switching actuator
  • Connection of different external conductors possible
  • No additional power supply necessary
  • Feedback of switching state and brightness value
  • Switch position display
  • Burn-in function for fluorescent lamps
  • Switch-on and dimming behaviour can be set
  • Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function
  • Integration into light scenes
  • Operating hours counter

Technical data

KNX medium: TP 256
Rated voltage KNX: DC 21 … 32 V SELV
Current consumption KNX: max. 6 mA
Power loss: max. 4 W
Ambient temperature: −5 … +45 °C
Storage/transport temperature: −25 … +70 °C
Control outputs
Control voltage: 1 … 10 V
Control current per output: max. 100 mA
Cable length: max. 500 m (0.5 mm²)
Switching outputs
Contact type: floating relay contacts (μ contact)
Switching voltage AC: AC 250 / 400 V
Switching current 230 V AC1: 16 A
Switching current 230 V AC3: 10 A
Switching current 400 V AC1: 10 A
Switching current 400 V AC3: 6 A
Fluorescent lamps: 16 AX
Switching voltage DC: DC 12 … 24 V
Switching current DC: 16 A
Min. switching current: 100 mA
Switch-on current 150 µs: 600 A
Switch-on current 600 µs: 300 A
Ohmic load: 3680 W
Capacitive load: 16 A / 200 µF
Lamp loads
Incandescent lamps: 3680 W
HV halogen lamps: 3680 W
LV halogen lamps with
    inductive transformers: 2000 VA
    electronic transformers: 2500 W
Fluorescent lamps T5/T8
    non-compensated: 3680 W
    parallel compensated: 2500 W / 200 µF
    lead-lag circuit: 3680 W / 200 µF
Compact fluorescent lamps
    non-compensated: 3680 W
    parallel compensated: 2500 W / 200 µF
Mercury vapour lamps
    non-compensated: 3680 W
    parallel compensated: 3680 W / 200 µF
Connection, outputs
    Connection mode: screw terminals
    single wire: 1 x 0.5 … 4 mm²
    stranded without ferrule: 1 x 0.34 … 4 mm²
    stranded with ferrule: 1 x 0.14 … 2.5 mm²
Mounting width: 72 mm (4 rail units)

Product documentation

Download

Product data sheet

Download

Database ETS4 + ETS5

Download

EC Declaration of Conformity

Download
SKU: 2194 REGHM Categories: ,