The MPH II and MDAC I modules are included in the P1 FULL version.
Equipped with line inputs in its original configuration, it can in fact be completed with optional slot cards: one for the RIAA MM/MC Phono stages, as well as another module offering three digital inputs with a resolution of up to 32 bit sampled at 384 kHz.
This modularity, both for the analog and digital parts, is supported by internal software that can be “upgraded” by the user by means of an easily accessible USB socket. Elipson P1 is therefore a device of the present looking to the future.
Elegant and sober at the same time, the P1 is totally transparent thanks to the care given to these circuits allowing extremely low background noise and distortion.
Complete with its multiple possibilities, its interface via the front screen offers you perfect comfort of use, complemented by its personalized and elegant remote control.
The result is a reproduction of the tiniest details, an airy spatialization and perfect respect for silences.
Our range is entirely made in France in our Burgundy factory
Maximum output voltage : 21 dBu (18.8 dBV) @ THD=1%.
Crosstalk : < -100 dB up to 10 kHz
Input impedance (balanced/unbalanced) : 500 kΩ / 1 MΩ
Signal to noise ratio : 102 dB (A) @ 1 V; Dynamic 120 dB
Total harmonic distortion : < 0.001% over the entire audio band between -16 and +16 dBu
Bandwidth (Line) : 2 Hz – 120 kHz @ – 3 dB
Output gain (balanced/unbalanced) : 18 dB / 12 dB
Total number of inputs : 3
Line inputs : 2 x Line RCA + 1 x Sym XLR
Outputs : 1 x RCA stereo (Asym) + 1 x XLR stereo (Sym) + sub + trigger out
Stereo/Mono mode : Yes on front panel
Balance : Yes ± 6 dB
Output power : 150 mW / 32 W
Harmonic Distortion : < 0,001 %
Signal to Noise Ratio : > 100 dB @ 10 mW / 32 Ω
Bandwidth : 2 Hz – 120 kHz
Compatible impedances : 16 to 600 Ω
L x H x P : 610 x 510 x 225 mm
THE EXALTED SOUND
A COMPLEMENTARY DUO
The P1 preamplifier and the A2700 power block are perfectly complementary.
In terms of design, they form a homogeneous unit with clean lines.
The P1 preamplifier has a balanced output dedicated to the A2700 amplifier.
An audiophile model capable of sublimating all your music while maintaining an optimal signal-to-noise ratio and a distortion reduced to the strict minimum.
The P1 preamplifier is modular and can be equipped with optional input cards to perfectly adapt to your needs.
The A2700 power amplifier is the perfect complement to the P1 preamplifier.
It is capable of developing a high power of 400 W RMS under 8 ohms in stereo mode or 1400 W RMS under 8 ohms in mono mode.
Designed for home cinema and all passive subwoofers, the Infinite A1000 amp can deliver up to 1000 watts into 4 ohms. This mono Class D amp is equipped with a variety of inputs: RCA, XLR and high level terminals, to work in any home theatre or hi-fi configuration.
THE EXALTED MULTIROOM
AMPLIFICATEUR DE PUISSANCE
High Audio performances with large power, elegant and perfect versatility
Stream your music via Bluetooth or Wi-Fi from any platform or stored music files.
The Connect 250 is particularly suitable for integration into any environment, even humid ones, thanks to the two brackets that allow it to be fixed against a wall or a false ceiling. The remote infrared cable supplied will facilitate its integration
YOU WILL FIND ENCLOSED :
- Elipson P1 / P1F preamplifier
- A power supply cable
- A remote control with battery included
- An user manual
- A pair of gloves