MOTION DETECTOR MINI BASIC

Product characteristics

  • Brightness-independent detection of motions in the detection field
  • Switch on: After detection of a motion
  • Switch off: No motion in the detection field and shut-off delay elapsed
  • Floating electronic switching contact

BM 360 MB WW

Intended use

  • Brightness-independent detection of motions in interior areas
  • Connection to KNX e.g. multi station or push-button interface for automatic switching of loads
  • Power supply via unchoked output of a (KNX) power supply with SELV
  • Clamp mounting in suspended ceilings
  • Ceiling installation on fixed ceilings in flush box according to EN¬†60670-1 with flush mounting set (ref.-no.:¬†PMM-UP-SET-WW)
  • Surface-mounted ceiling installation with surface mounting set (ref.-no.:¬†PMM-AP-SET-WW)

Technical data

Rated voltage: DC 24 … 32 V SELV
Stand-by power: < 0.1 W
Current consumption: max. 4 mA
Ambient temperature: ‚ąí5 … +45 ¬įC
Storage/transport temperature: ‚ąí25 … +70 ¬įC
Relative humidity: 10 … 100 % (no condensation)
Protection class: III
Protection level: IP 44
Motion detection
¬†¬†¬†¬†Detection angle: 360¬į
¬†¬†¬†¬†Range: √ė approx. 6 m (mounting height 3 m)
Shut-off delay: approx. 10 s
Switching output
    Electric strength: 40 V
    Current carrying capacity of device: max. 50 mA
    Connected load: max. 0.15 W
Dimensions
¬†¬†¬†¬†Ceiling cut-out (√ė x D): 44 x 35 mm
¬†¬†¬†¬†Dimensions (√ė x H): 53.5 x 38 mm (with design ring)
    Cable length: max. 30 m
    Max. thickness of the suspended ceiling: approx. 25 mm
    Installation depth: min. 35 mm
    Distance between concrete ceiling and suspended ceiling: min. 20 mm
¬†¬†¬†¬†Design ring √ė inside: 35.6 mm
¬†¬†¬†¬†Design ring √ė outside: 53.5 mm
    Profile height design ring: 1.8 mm
    Profile height lens: 5.5 mm

Product data sheet

Download

EC Declaration of Conformity

Download

Operating instructions

Download

How-to

Download

SKU: BM 360 MB WW Categories: ,