A 10911 ST
Intended use
- Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values, temperatures, calling up and saving light scenes, etc.
- Installation in flush box according to EN 60670-1
Product characteristics
- KNX medium: TP 256
- Operating concept (rocker or button) adjustable for each operating area
- Button evaluation (single- or dual-area operation) adjustable
- One or two functions per operating area
- Integrated bus coupling unit
- Alarm function, optional acknowledge by pressing any button
- Disabling function: Disabling or change function mode of single or all button functions
- Status LED brightness adjustable
- Measurement of room temperature
- One status LED per operating area – red, green or blue, adjustable
- Connection of a push-button extension possible
- Connection of installation buttons or reed contacts possible
- KNX Data Secure compatible with ETS 5.7.3 or higher
Technical data
KNX | |
KNX medium: | TP 256 |
Security: | X-Mode |
Commissioning mode: | S-mode |
Rated voltage: | DC 21 … 32 V SELV |
KNX current consumption | |
nur KNX Taster | 4.9 … 8.2 mA |
mit Taster Erweiterung | 6.6 … 9.4 mA |
mit externen Schaltkontakten | 7.7 … 11 mA |
Connection, KNX: | terminal |
Connection cable: | EIB-Y (St)Y 2x2x0.8 |
Protection class: | III |
Ambient conditions | |
Ambient temperature: | −5 … +45 °C |
Storage/transport temperature: | −25 … +70 °C |
Anschluss Taster Erweiterung | |
Number: | 1 |
Cable type: | J-Y(St)Y 2 x 2 x 0.8 mm |
Cable length: | max. 30 m |
Anschluss externe Schaltkontakte | |
Number: | max. 20 |
Cable type: | J-Y(St)Y 2 x 2 x 0.8 mm |
Cable length: | max. 30 m |